Reasons for sealing air leakage of automatic bottle blowing machine
Time：
2021-12-30
1. The pressure of the sealing cylinder is enough. If a low-pressure sealing cylinder is selected, the low-pressure pressure can be kept below 8 kg. Normal water bottles are no problem. But it also depends on the high-pressure blowing pressure.
1. The pressure of the sealing cylinder is enough. If a low-pressure sealing cylinder is selected, the low-pressure pressure can be kept below 8 kg. Normal water bottles are no problem. But it also depends on the high-pressure blowing pressure. If the high-pressure blowing pressure is too high, the sealing cylinder will be pressed down. If the high-pressure pressure is reduced, it can be blown into a bottle. Try to reduce the high-pressure pressure, or if the high-pressure pressure is too large, the clamping pressure If it is too small, it will spread the mold and cause air leakage in the seal, which can increase the automatic clamping pressure.
2. Whether the sealing glue is damaged or it is aligned with the sealing part, if it deviates from the sealing part, it will leak air.
3. Whether the cylinder block or seal of the sealing cylinder is damaged, if the seal is damaged, it can be directly reflected by opening the solenoid valve of the sealing cylinder.
4. Whether the solenoid valve of the sealed cylinder is leaking or stuck or the exhaust is not smooth, these are also the reasons that affect the leak of the sealed cylinder.
MORE BLOG
Want more product details? Send us an inquiry